670 Old Hull Rd, Suite A, Athens, GA 30601 Mon–Fri 8 AM–5 PM
contact@probuiltathens.com

Site work · Athens & Northeast Georgia

Retaining Walls in Athens, GA

Turn a slope into usable ground and keep it there. Segmental block retaining walls built on a real base, with drainage stone behind them and reinforcement where the height calls for it.

Stacked stone-look block retaining wall
Retaining Walls
Residential & commercial

Where retaining walls make sense

The rolling Piedmont around Athens means a lot of lots have more slope than their owners want. A retaining wall can:

  • Create a flat yard or patio area on a sloped lot
  • Hold the cut slope behind a house pad or garage
  • Support a driveway along a hillside
  • Hold the fill side of a building pad where space is tight
  • Stop erosion on a steep bank

Segmental block walls

Most of our walls are segmental retaining walls: interlocking concrete blocks stacked without mortar, set back slightly each course. They're durable, look good, handle Georgia freeze and thaw, and can be reinforced with geogrid for height.

The parts you don't see

A wall's strength is mostly underground and behind it: a compacted leveling base, the first course buried below grade, clean drainage stone and a perforated pipe to carry water out, and geogrid layers tied into compacted backfill. That's what we build, and it's why we'd rather build a wall right than build it cheap.

Red clay and walls

Clay holds water and swells, which pushes on walls. That's one more reason drainage behind the wall isn't optional here. More in building on Georgia red clay.

How it goes

Our retaining walls process

Every site is different, but the order of work rarely is. Here's what to expect from first call to final grade.

  1. Look at the slope

    We look at the height, the soil, what sits above the wall (a drive, a building, a yard) and where the water goes.

  2. Design check

    Taller walls and walls holding up driveways or structures need an engineered design and often a permit. We'll tell you where your wall falls.

  3. Base

    We excavate and build a compacted, level base, the single most important part of a wall.

  4. Build with drainage

    Block goes up course by course with clean drainage stone and a drain pipe behind, plus geogrid where the design calls for it.

  5. Cap and grade

    We cap the wall, finish backfill and grade above and below so water is directed away.

Questions

Retaining Walls FAQ

Why do retaining walls fail?
Usually water. When soil behind a wall gets saturated, the pressure on the wall multiplies. Walls without drainage stone and an outlet bulge, lean and fall. Poor bases and missing reinforcement are the other common causes.
How tall can a wall be without an engineer?
It depends on the wall system, the soil, the slope and what's above it, and the local building code sets the threshold for permits and engineering. Walls holding up a driveway or building need engineering even when they're short. We'll tell you what applies.
Can a wall help my drainage problem?
A wall can create a flat area and redirect surface water when it's paired with a swale or drain. But a wall is never a substitute for drainage. It needs drainage itself.

Where we work

Retaining Walls near you

We handle retaining walls across Athens-Clarke, Oconee, Jackson, Madison, Barrow, Oglethorpe, Walton and Morgan counties.

Got dirt to move?

Tell us where the lot is and what you want to build. We'll walk it, explain what the site needs and give you a clear written quote.